DOTDASH.SPACE
Forum
Notifications
Clear all
Topic starter
13/06/2023 4:25 pm
The first version is here!
It's very much in Alpha stage and there are some features I've disabled on purpose, until I have the time to get them working correctly.
This version should have working:
COM1 and COM2 radios (for use with SimCom X Pilot)
Working ATIS (only COM1 station can have an ATIS)
Phone calls to other ATCOs
You will show on the main JoinFS map if you select SCX Mode in the CFG.
You won't if you select Group Mode, but the latest Group server will be needed.
Tips:
Type help in the chat for a list of commands.
Click the CFG button on first start to configure everything.
There will be bugs, let me know what they are so I can fix them.
A log file is located in ProgramFiles(x86)/SimCom X ATCO
I'll put a how to together when I get time.
Untill then please feel free to ask questions here or on the Matrix Chat rooms if you have Matrix.
17/06/2023 4:34 pm
Roo, working well in testing so far, thanks from Devil @ vTAC.
Topic starter
18/06/2023 7:29 pm
Thanks Mike.
I could hear you during testing, but wasn't able to reply properly due to being busy.
I'll work on the Latch PTT buttons next and issue an update.
Topic starter
16/08/2023 3:14 pm
Version 0.0.0.4 released today.
Improvements made on the Audio selection screen.
PTT Latch buttons now working.
Search the DIR for the other ATCOs phone number.
Topic starter
03/09/2023 6:54 pm
Version 0.0.0.8 released today.
I've made a few changes to the way messages are sent, which should fix a number of glitches.
Voice coms with a pilot client and ATIS Should be fully working with no issues.
So let me know if they aren't.
Phone calls and Direct lines should also be working.
But I have noticed a delay with these, let me know.
The interface to display traffic on EuroScope or VRC is underway and shouldn't be too much longer.
23/09/2024 8:21 am
Hello there!
I've been having issues connecting two computers via the group, it works intermittently and when it doesnt it stays looking for a connection. Firewall has been disabled and they both share a local network. Any ideas?
Topic starter
23/09/2024 3:00 pm
Hi Hola,
I'm still writing the ATCO client at the moment.
The version that's available at the moment isn't complete.
Are you able to share your log file anyway, I can then check I've covered the issue you're having.
24/09/2024 4:14 pm
Sure! Here goes
###### SimCom X ATCO Log Created at 14:48:17 20/09/2024 Zulu ######
14:48:17 Our ID = 42a6c07b-2170-4bc3-87aa-eec068829d65
14:48:17 Local IP = 192.168.100.112
Internal UDP port = 7700
14:48:19 External IP = 213.98.38.178
External UDP port = 7700
14:48:19 Upnp Unticked.
14:48:47 Radio is now listening and waiting for connections....
14:49:02 SCX Check Error
System.FormatException: An invalid IP address was specified.
at System.Net.IPAddress.InternalParse(String ipString, Boolean tryParse)
at SimComX_ATCO.MainWindow.<Ping_SCX>b__229_0()
14:49:21 Radio stopped listening.
14:49:21 Removed ID 42a6c07b-2170-4bc3-87aa-eec068829d65
14:49:21 Radio is now listening and waiting for connections....
14:49:30 Radio stopped listening.
14:49:30 Removed ID 42a6c07b-2170-4bc3-87aa-eec068829d65
14:49:31 Radio is now listening and waiting for connections....
14:49:44 Input device 0 Headset Microphone (Logitech H570e Stereo) is now in use.
14:49:44 Output device 0 Headset Earphone (Logitech H570e Stereo) is now in use.
14:49:44 RingTone will sound from device 0 Headset Earphone (Logitech H570e Stereo)
14:49:58 Radio stopped listening.
14:49:58 Removed ID 42a6c07b-2170-4bc3-87aa-eec068829d65
14:49:59 Radio is now listening and waiting for connections....
14:50:07 Radio stopped listening.
14:50:07 Removed ID 42a6c07b-2170-4bc3-87aa-eec068829d65
14:50:07 Radio is now listening and waiting for connections....
15:08:45 ATIS Information Changed to information
15:08:56 Port Removed!
15:08:56 Clients Removed!
15:08:56 Removed ID 42a6c07b-2170-4bc3-87aa-eec068829d65
If I may ask, when do you think the client will be complete?
Thank you so much for everything.
Topic starter
24/09/2024 5:14 pm
14:49:02 SCX Check Error
System.FormatException: An invalid IP address was specified.
at System.Net.IPAddress.InternalParse(String ipString, Boolean tryParse)
at SimComX_ATCO.MainWindow.<Ping_SCX>b__229_0()
That's the badger.
I think I changed they way I shared client details in the pilot client but not in the released ATCO client.
So at the minute Pilots can't speak to ATCOs.
ATCO clients should be able to connect to other ATCO clients.
If I may ask, when do you think the client will be complete?
Thank you so much for everything.
It all depends on how many books Mrs Roo has to read, whilst I have time to myself.
Although I will make the ATCO client a priority now in order to get things working again. I'll then slowly add the extra features.